|
|
Enaly Air Dryer filled with extremely absorbent silica beads removes almost all moisture from the ambient air. Equipped with filters at its air inlet and outlet, it dramatically reduces particles entering to your ozone generator and hence reduces the risk of the second pollution. Best of all, it will increase the efficiency of your ozone generator.
Enaly Air Dryer is user-friendly. The silica beads turn from dark blue to a pink color when filled with moisture. The silica beads can be easily recharged by heating them in your oven or microwave. The filters can be easily cleaned by a brush or a vacuum.
|
|
Specifications:
| Model Name |
Enaly Air Dryer (200ml) |
Air Dryer (500ml) |
For models |
OZX-300AT, OZX-300U,
EOZ-300Y,
OZX-B300T and OZX-B400T.
|
1000BT-12, OZX03K and OZX05K. |
Volume |
200 ml
|
500 ml |
Model Name |
Silicone Air Dryer |
Dimension of Outlet |
6mm |
Air Inlet |
6mm |
Features:
1. Can be repeatedly used after heated in a microwave or an oven.
2. Air filters at inlets are included.
3. Dark blue silica beads turn to a pink color when filled with moisture.
|
O3 Destroyer |
|
Enaly Ozone Destroyer is designed to complement your existing ozone generating system. Filled with activated carbons it removes excess ozone from escaping to the surrounding air. The activated carbons are produced by high temperature steam activation of coal with a high surface area effectively absorbing gases for air purification application.
|
The Ozone Output Regulating Dial allows precise ozone output adjustments (0~100%), making it ideal for working together with a Redox (ORP) controller for fish pond and aquarium applications.
This ozone generator is ideal for ozone applications that require a different air source than ambient air, as well as for high ozone output applications that most other home ozone generators can not provide.
Specifications:
Model Name: Active Carbon O3 destroyer
Volume: 200 ml
Dimension of outlet: 6mm
Air inlet: 6mm
|
Venturi Ozone Injector |
|
Enaly Venturi is designed to be used with an ozone generator for water treatment. It is made of anti-ozone material, PVDF. Connected to your existing filtration system it allows an ozone injection point, where the vacuum effectively sucking the ozone gases into the water flow.
|
|
Specifications:
Model Name |
25100 |
25152 |
32235 |
48275 |
58295 |
Material |
PVDF |
PVDF |
PVDF |
PVDF |
PVDF |
Length |
100mm |
152mm |
235mm |
275mm |
295mm |
Out Diameter |
1/2" |
3/4" |
1" |
1.5" |
2" |
Water Volume |
0.2-1 ton |
1-3 ton |
3-10 ton |
10-25 ton |
25-50 ton |
Features:
Anti-ozone material
|
Connections of venturi with ozone generator to pool or spa
|
Air Pump |
|
Enaly Air pump, constructed with anti-ozone material, is designed to work with an ozone generator without an internal air pump. It consumes low power but provides steady air output. Functioning as a part of an ozone generating system, it is especially suitable for spa, aquarium, fish breading, water tank and where purification is required.
|
|
Specifications:
Model Name: Air Pump
Air Output: 2-3 L/min
Pressure: about 50cm max. in water depth
Dimension of outlet: 6mm
Power: AC110-120V or AC220-240V
Wattage: 6W
Features:
1. Anti-ozone materials being used.
2. Silent operations.
3. Steady air outputs |
Air Pump Diaphragm |
|
AP300 is a diaphragm replacement for OZX-300U and OZX-B300T.
|
|
Specifications:
Model Name: Air Pump Part AP300
Dimension: 56mmX15mmX1m |
|
300x216.jpg)
