ozone-generator-main
ozone-generatorHome-ozone-generatorProductsoemResellersContactsShopping
prolist
 
Ozone Generators
 
 
Ozone Water Purifiers
 
 
Ozone Air Purifiers
 
 
Aquarium Ozone Generator
 
 
Spa Ozone Generator
 
 
Ionic Air Purifiers
 
 
Industrial Units
 
 
Accessories & Parts
 
Oxygen Concentrators
 

aquarium-ozone-generator-ozac-plus50/100/200
OZAC-PLUS 50/100/200
aquarium-ozone-generator-ozac-plus
REAR VIEW


ENALY OZAC-PLUS 50/100/200mg aquarium ozone generator comes with built-in redox meter/controller with a digital readout and use adjustable set point to turn the ozone on and off automatically. It is the complete solution for the effective and safe ozonization of aquariums.

Three models:

OZAC-PLUS 50 ------------------- 50mg/hr ozone output
OZAC-PLUS 100 ----------------- 100mg/hr ozone output
OZAC-PLUS 200 ----------------- 200mg/hr ozone output


Specifications


Max. Ozone output:

OZAC-PLUS 50 ------------------- 50mg/hr ozone output
OZAC-PLUS 100 ----------------- 100mg/hr ozone output
OZAC-PLUS 200 ----------------- 200mg/hr ozone output

Max. ORP reading: 450mV
Voltage: DC12V
Power Adaptor: AC100V- 240V 50-60Hz,12W
Certification: UL TUL CE
Dimension: 199mmX163mmX64mm
Ozone output: Adjustable between 10-100% of rated output
Inlet and outlet port dimeter : 6 millimetres
Net Weight: 1.5 kilograms

200ml air dryer included
ORP probe is not included ( please buy it separately)

 

Key Points of Using Ozone to Aquarium

  • The feed gas must be dry and free from impurities.

  • Use contact chamber, such as protein skimmer that its materials must be highly resistant or inert to ozone, to transfer ozone gas into water. Never inject ozone directly into the fish tank. The aquarium inhabitants should be protected from exposure to free ozone and /or oxidation products. The recommended method to remove any residual free ozone and any free oxidation products is by vigorous aeration followed by filtration through activated carbon.

  • The best method to monitor ozone input is by measuring the oxidation-reduction potential (ORP) with probes or by a Redox meter/controller . Redox potential values of between 300 and 350 mV are recommended as the desirable level. Do not let the redox value of the aquarium water exceed 400 mV as harmful substances (commonly in the form of hypochloric and hypobromic acids) can be produced, which could damage sensitive organisms.

  • Ozonized air should be prevented from escaping into the room; it is advisable to install a carbon filter on your protein skimmer or ozone reactor where ozonized air escapes.

 

Get more information via these external links

Articals on Ozone and the Reef Aquarium by Reefkeeping.com, an online magazine for the marine aquarist

http://reefkeeping.com/issues/2006-03/rhf/index.php

Part 1: Chemistry and Biochemistry

http://reefkeeping.com/issues/2006-04/rhf/index.php

Part 2: Equipment and Safety

http://reefkeeping.com/issues/2006-05/rhf/index.php

Part 3: Changes in a Reef Aquarium upon Initiating Ozone

Join the http://reefcentral.com/ Forums for information exchange.

Reef Central is an online community where quality information about the marine and reef aquarium hobby can be exchanged among all levels of hobbyist from beginner to advanced. Our goal is to help educate people about the saltwater aquarium hobby and enhance awareness of the fragility of coral reefs around the world. We hope you will join us and that you find this site useful.

 

Notice:

Links to Other Web Sites.

The Site contains links to other Web sites. We are not responsible for the content, accuracy or opinions express in such Web sites, and such Web sites are not investigated, monitored or checked for accuracy or completeness by us. Inclusion of any linked Web site on our Site does not imply approval or endorsement of the linked Web site by us. If you decide to leave our Site and access these third-party sites, you do so at your own risk.

 

Copyright ©2008 Enaly.com